철도용 스팬별 핫 판매 120톤 오버헤드 이중 트러스 빔 발사기

제품

철도용 스팬별 핫 판매 120톤 오버헤드 이중 트러스 빔 발사기

철도용 스팬별 핫 판매 120톤 오버헤드 이중 트러스 빔 발사기

철도 교량 대들보 직립 기계에 대한 경간별 인기 판매 120톤 오버헤드 이중 트러스 빔 발사 장치는 광범위한 작업, 우수한 성능, 편리함의 적응을 병합합니다.

문의 보내기

설명

기본정보
모델 번호.BGM
유형평범한
카트 가로 이동 속도 (M/Min)2.45
카트 세로 이동 속도 (M/Min)4.25
교량운송차량의 속도(M/Min8.5
복귀 속도(M/분)17
운송능력(T)100*2
적용 가능한 스큐 브릿지 각도0-450
적용 스팬(M)≤55
리프팅 용량(T)200톤
Tolley 세로 이동 속도 (M/Min)4.25
운송 패키지더 나은 비용 절감을 위한 컨테이너 로딩
사양40′HQ 또는 벌크 화물선
등록 상표뉴크레인
기원허난 창위안시
생산 능력100sets/월
제품 설명
철도용 스팬별 핫 판매 120톤 오버헤드 이중 트러스 빔 발사기

Hot Selling 120 Ton Overhead Double Truss Beam Launcher by Span by Span for Railway


교량 거더 건립 기계는 광범위한 작업, 우수한 성능, 편리한 작동, 안전 구조의 적응을 하나의 전체로 통합합니다. 그것은 레일형 프리캐스트 빔 호이스팅 랙 장비의 강철 구조를 가지고 있습니다. 이 제품은 일반 건설뿐만 아니라 산악 고속도로 경사면, 작은 반경 곡선 교량, 사교 및 터널 교량 요구 사항의 건설에도 사용할 수 있습니다.

교량 거더 건립 기계는 주 대들보, 크레인, 앞다리, 뒷다리, 앞다리 실린더, 뒷다리 실린더 및 앞, 중간, 뒷다리의 가로 연결로 구성됩니다. 제어 부분은 유압 시스템과 전기 제어 시스템으로 구성됩니다. 교량 거더 건립 기계는 합리적인 소형 구조와 편리한 설치가 특징이며 주요 표준 대들보는 핀 연결로 연결됩니다. 이중 거더 구조는 두 개의 프레임 거더 사이를 용접 파이프로 연결합니다.

Hot Selling 120 Ton Overhead Double Truss Beam Launcher by Span by Span for Railway

Hot Selling 120 Ton Overhead Double Truss Beam Launcher by Span by Span for Railway


Hot Selling 120 Ton Overhead Double Truss Beam Launcher by Span by Span for Railway

Hot Selling 120 Ton Overhead Double Truss Beam Launcher by Span by Span for Railway

50 t : 2 setsΦ19.5 steel wire rope 8 m: 4 ropesSleepers: severalElectric welding machine: 1 setOxygen, acetylene: 1 setHammer(12 pound and 8 pound): 1 set for eachWrench and pincher: several Gradienter: 1 set3. What are inspection standard for load test of bridge launching tube beam launcher crane?Dynamic load test: 1.1 times rated load.Static load test: 1.25 times rated load.4. How to make highway bridge concrete girders?Highway Bridge concrete girders could be made by 4 methods:a. Full span prefabrication.b. Segment girder prefabrication.c. Full span cast-in-place girder.d. Segment cast-in-situ.5. How about maintenance of bridge launching tube beam launcher crane?a. Lubricating:Working performance and service life of all mechanisms of crane depend on lubricating to a big extent.b. Steel wire rope:Fracture of wire has to be specially noticed. A new steel wire rope has to be changed immediately with the condition of broken wire, broken strands and wear loss to scrapping standard.c. Spreader: The spreader has to be checked regularly.d. Pulley block:Mainly check rope race wearing condition, check whether wheel flange is cracked and whether pulley could get stuck in the axle or not.e. Wheels:Regularly check wheel flange and tread, a new wheel has to be immediately replaced as crack part or wearing in wheel flange reaches 10% of wheel thickness;Re-polishing has to be done as diameters between two driving wheels on tread differs more than D/600, or there are severe scar on the tread.f. Brake: Check one time per shift; The brake should be in accurate movement, and pins do not allow to be stuck. Brake shoes shall fit brake wheels correctly; the brake shoes interval shall be equal to open them.br>