대용량 100톤 브리지 직립 갠트리 크레인 판매
대용량 100톤 브리지 직립 갠트리 크레인 판매

대용량 100톤 브리지 직립 갠트리 크레인 판매

대용량 100 톤 교량 직립 갠트리 크레인 판매 교량 대들보 직립 기계는 광범위한 작업, 우수한 성능, 편리한 작동, 안전 구조의 적응을 병합합니다.

문의 보내기

설명

기본정보
모델 번호.100톤 교량 설치 갠트리 크레인
최대 리프팅 무게>200t
주 거더 형태이중 대들보
유형평범한
카트 가로 이동 속도 (M/Min)2.45
카트 세로 이동 속도 (M/Min)4.25
교량운송차량의 속도(M/Min8.5
복귀 속도(M/분)17
운송능력(T)100*2
적용 가능한 스큐 브릿지 각도0-450
Tolley 세로 이동 속도 (M/Min)4.25
트롤리 리프팅 속도(M/Min)0.8
적용 스팬(M)≤55
리프팅 용량(T)200톤
운송 패키지더 나은 비용 절감을 위한 컨테이너 로딩
사양40′HQ 또는 벌크 화물선
등록 상표뉴크레인
기원허난 창위안시
생산 능력100sets/월
제품 설명
대용량 100 톤 교량 직립 갠트리 크레인 판매

Large Capacity 100 Ton Bridge Erection Gantry Crane for Sale

Large Capacity 100 Ton Bridge Erection Gantry Crane for Sale

Large Capacity 100 Ton Bridge Erection Gantry Crane for Sale


Large Capacity 100 Ton Bridge Erection Gantry Crane for Sale

Large Capacity 100 Ton Bridge Erection Gantry Crane for Sale

50 t : 2 setsΦ19.5 steel wire rope 8 m: 4 ropesSleepers: severalElectric welding machine: 1 setOxygen, acetylene: 1 setHammer(12 pound and 8 pound): 1 set for eachWrench and pincher: several Gradienter: 1 set3. What are inspection standard for load test of bridge launching tube beam launcher crane?Dynamic load test: 1.1 times rated load.Static load test: 1.25 times rated load.4. How to make highway bridge concrete girders?Highway Bridge concrete girders could be made by 4 methods:a. Full span prefabrication.b. Segment girder prefabrication.c. Full span cast-in-place girder.d. Segment cast-in-situ.5. How about maintenance of bridge launching tube beam launcher crane?a. Lubricating:Working performance and service life of all mechanisms of crane depend on lubricating to a big extent.b. Steel wire rope:Fracture of wire has to be specially noticed. A new steel wire rope has to be changed immediately with the condition of broken wire, broken strands and wear loss to scrapping standard.c. Spreader: The spreader has to be checked regularly.d. Pulley block:Mainly check rope race wearing condition, check whether wheel flange is cracked and whether pulley could get stuck in the axle or not.e. Wheels:Regularly check wheel flange and tread, a new wheel has to be immediately replaced as crack part or wearing in wheel flange reaches 10% of wheel thickness;Re-polishing has to be done as diameters between two driving wheels on tread differs more than D/600, or there are severe scar on the tread.f. Brake: Check one time per shift; The brake should be in accurate movement, and pins do not allow to be stuck. Brake shoes shall fit brake wheels correctly; the brake shoes interval shall be equal to open them.br>